| Accessories |
 |
General International Single Machine
Hook-up Kit
- (2) 4" wire bail hose clamps
- (1) 4" universal dust hood outlet
- (1) 4 x 10" polyethylene flexible hose
- (3) Heavy duty clear plastic collector bags
|
$49.00 |
 |
General International Two Machine Hook-up
Kit
- (10) 4" wire bail hose clamps
- (1) 4" universal dust hood outlet
- (2) 4 x 10" polyethylene flexible hose
- (6) Heavy duty clear plastic collector bags
- (1) Table saw dust hood
- (2) 4" blast gates
- (1) 4" Y fitting
|
$99.90 |
| 20-200 |
General International Power Feeder
- 3 rollers 4 speeds
- 6, 8, 10 & 13 m/min
- 1/4 HP motor
|
$529.00 |
| 20-220 |
General International Power Feeder
- 3 rollers 8 speeds
- 5, 8, 9, 15 & 23 m/min
- 1/2 HP motor
|
$849.00 |
| 20-340 |
General International Power Feeder
- reversible switch
- fully adjustable
- high-grip rubber rollers
- 1 HP motor
|
$1112.00 |
| 20-480 |
General International Power Feeder
- reversible switch
- fully adjustable
- high-grip rubber rolls
- 1 HP motor
|
$1352.00 |
|
70-016 |
16 Piece Forstner Bit Set |
$52.00 |
|
95-700 |
7" Cabinetmakers Vise |
$79.00 |
|
90-130 |
Riser Attachment Kit for 90-125 Bandsaw |
$69.00 |
 |
25-105 4" 4-jaw scroll chuck (1" - 8)
25-605 4" 4-jaw scroll schuck (1-1/4" - 8) |
$74.00 |
| 25-210 |
4 Piece Wood Turning Chisel Set
- 3/4" diamond parting tool
- 1/2" round nose scraper
- 1" skew chisel
- 1/2" bowl gouge
- wooden case
|
$176.00 |
| 25-036 |
Wood Lathe Duplicator
- creates perfectly matched spindles with ease
- extruded aluminum base and carriage
- smooth hand wheel controlled rack & Pinion system
- high speed steel cutter
|
$429.00 |
| 40-030 |
Router Table
- includes 12" x 9" router insert plate, starting pin and 1 each 1-1/4",
2-5/8" & 3-7/8" insert rings
|
$149.00 |
| 40-005 |
Deluxe Cast Iron Router Table
- pivoting fence-mounted tenoning jig
- miter gauge & feather board included
|
$720.00 |
| 40-010 |
12" Dovetail Fixture
- Handles stock up to 12" wide and from 5/16" to 1-1/4" thick
- Put the stock in position and pull the handle to lock it into place
- 1/2" half-blind template included (item 40-016)
|
$69.00 |
| 40-020 |
24" Dovetail Fixture
- Male and female dovetail joints are cut simultaneously
- Side stops provided
- 1/2" half-blind template included (item 40-022)
|
$179.00 |
| 40-040 |
General International Router Table
- Independently adjustable left and right fences
- Includes 12" x 9" router insert plate, starting pin, and 2 removable
insert rings (permitting 3 different diameters: 1-1/4" - 2-5/8" &
3-7/8")
- Movable switch with outlet
|
$369.00 |
| 40-150 |
Universal Cutterhead for 3/4" or 1-1/4"
shaper |
$212.00 |
| 20-100 |
"The Brute" Power Feeder
- fully adjustable - fits a variety of machines
- variable speeds 6.5 to 40 fpm in forward or reverse
- powerful 1/8 HP motor
|
$319.00 |
| 45-100 |
General International Edge Bander
- Electronically controlled heat element variable heat from 100 - 200
degrees C
- Accommodates a wide range of edge banding material up to 2" thick
- Built-in cut-off knife with palm-strike knob
- 26-3/4" x 7-1/2" laminate covered table supports large work pieces
|
$359.00 |
 |
50-050 General International Tenoning Jig
- Heavy duty cast iron construction
- Perfect fit right or left tilt table saws
- Large handles for better operator control
|
$119.00 |
 |
70-905 General International Wood Chisel and Mortising Attachment Kit
- 1/4", 5/16", 3/8" & 1/2"
- Plastic box storage
- Can be installed on most drill presses
|
$87.00 |
 |
55-185 7 Piece Deluxe 8" Dado Blade Set
- Includes Wooden case
- Two 24 tooth exterior blades
- Standard 5/8" bore
- Max. 6000 rpm
- 1/8" - 13/16" dado capacity
|
$112.95 |
 |
SLT-40 or -60 Excalibur Sliding Table
- Easy to install sliding table system for table saws and shapers
- ensures quick and precise cuts with large panels
- Fits virtually all 10" to 14" table saws, and most shapers
|
$600.00
$800.00 |
 |
50-020/-060/-080 Zero-Clearance Table Saw
Insert |
$39.99 |
 |
50-EB3 "Osborne" Miter Gauge
- Solid triangular design for tight miter joints
- Sliding flip-up stop
- Easy to read index graduations
- Patented extension arm assembly makes it quick & easy to find any
angle and lock it securely in place
|
$129.00 |
 |
50-EXBC10 (10") or 50-EXBC14 (14") Overarm Blade Cover System with
Dust Collection Capability
- 4" main boom and 3" inner boom
- Flexible 3" hose connects the blade cover to the boom
|
$379.00 $479.00 |
 |
Electronic Earmuffs
- LED power indicator on/off switch with volume control
- Attenuates noise over 85 dB
- Built-in microphone amplifies low-level sounds
|
$39.00 |
 |
50-025 General International Universal Extendable Mobile Base
- Heavy duty steel
- Strong 3" wheels
- Rubber leveling feet
- Adjustment in 1" increments
- 500 lbs. capacity
|
$59.00 |
 |
50-030 General International Heavy Duty Mobile
Base for Table Saws with Extension Table & Legs
- Heavy duty steel
- Strong 4" wheels
- 900 lbs. capacity
|
$178.00 |
 |
50-167S General International Flexible &
Expandable Roller Stand
- Adjustable height from 24-1/4" - 37"
- 9 Nickel-plated rollers (1-1/2" x 20")
- Maximum expanded length 51-1/2"
- Minimum compacted length 21-1/4"
- 4" wheels with locking foot levers
- Load capacity of 300 lbs. per set
|
$279.00 |
|
10-824 10-929 |
18" x 24" or 29" x 29" Pneumatic Mobile
Base
- Move heavy objects on a cushion of air
- Requires standard compressed air and a smooth hard floor
- Customizable - can be cut to fit almont any size exactly
- Safer than wheels - no topping and zero rollback
|
$189.00 $249.00 |
|
|
|
|